AeroBurn Burn Gel is a topical hydrogel designed for immediate first aid care of minor burns, scalds and sunburn. The clear, water-based formula spreads easily to cover the affected area and delivers rapid cooling comfort. With a high water content, the gel helps rehydrate the skin’s surface while creating a soothing barrier from external contamination. Compact, tamper-evident packaging and clear on-pack directions support fast application in time-critical situations across workplaces, vehicles and home first aid kits.

The formulation is water soluble, allowing simple rinsing with water when it is time to reassess or redress the burn. Clear usage guidance printed on the pack (apply generously, do not rub, allow to cool for 30 minutes, repeat if necessary) makes it suitable for bystanders and trained responders alike. 

Packaging carries internationally recognised handling symbols including do not reuse and recycling indicators on outer cartons, supporting safe single-use practice and responsible disposal. Ingredient disclosure (including propylene glycol and glycerine) and manufacturer/sponsor details are present to aid compliance and traceability. The range is presented in portable formats that suit immediate point-of-injury care and replenishment programs.

• Rapid cooling comfort: helps ease the sensation of heat from minor burns and scalds
• High water content: rehydrates the burn surface and supports a soothing micro-environment
• Water soluble: rinses off easily with water for reassessment or reapplication
• Clear directions: straightforward steps support correct use in first aid settings
• Portable packaging: compact, tamper-evident packs suited to kits and on-the-go care
• Kit friendly: appropriate for workplaces, vehicles and home first aid stations

Sachet 3.5 g provides a hygienic, single-use portion for immediate application. The compact pouch fits easily in first aid kits, vehicles and travel bags, supporting quick response at point of injury.

This product is not a substitute for direct medical attention from a healthcare practitioner. Always read the label and follow the directions for use.

The post AEROBURN Burn Gel Sachet 3.5g first appeared on Rural & Remote First Aid.

AeroBurn Burn Gel is a topical hydrogel designed for immediate first aid care of minor burns, scalds and sunburn. The clear, water-based formula spreads easily to cover the affected area and delivers rapid cooling comfort. With a high water content, the gel helps rehydrate the skin’s surface while creating a soothing barrier from external contamination. Compact, tamper-evident packaging and clear on-pack directions support fast application in time-critical situations across workplaces, vehicles and home first aid kits.

The formulation is water soluble, allowing simple rinsing with water when it is time to reassess or redress the burn. Clear usage guidance printed on the pack (apply generously, do not rub, allow to cool for 30 minutes, repeat if necessary) makes it suitable for bystanders and trained responders alike. 

Packaging carries internationally recognised handling symbols including do not reuse and recycling indicators on outer cartons, supporting safe single-use practice and responsible disposal. Ingredient disclosure (including propylene glycol and glycerine) and manufacturer/sponsor details are present to aid compliance and traceability. The range is presented in portable formats that suit immediate point-of-injury care and replenishment programs.

• Rapid cooling comfort: helps ease the sensation of heat from minor burns and scalds
• High water content: rehydrates the burn surface and supports a soothing micro-environment
• Water soluble: rinses off easily with water for reassessment or reapplication
• Clear directions: straightforward steps support correct use in first aid settings
• Portable packaging: compact, tamper-evident packs suited to kits and on-the-go care
• Kit friendly: appropriate for workplaces, vehicles and home first aid stations

Size – Tube 25g: compact hydrogel format that dispenses cleanly for targeted coverage and cooling comfort on minor burns, scalds and sunburn, ideal for first aid kits and quick response.

Supplied as one tube, ideal for individual kits and straightforward replenishment. A single 25 g pack keeps cooling treatment readily available without excess bulk.

This product is not a substitute for direct medical attention from a healthcare practitioner. Always read the label and follow the directions for use.

The post AEROBURN Burn Gel Tube 25g first appeared on Rural & Remote First Aid.

AeroBurn Burn Gel Dressing is a sterile, gel‑impregnated pad purpose‑built for first aid treatment of minor burns and scalds in workplaces, community settings, vehicles and home kits. Its water‑based hydrogel helps cool the burn surface and soothe discomfort on contact, while the soft non‑woven carrier lays smoothly over curved areas for quick, confident coverage. The single‑use format supports best practice first response and straightforward disposal after reassessment.

Designed as a protective covering, the dressing functions as a mechanical barrier during the critical early phase of care. The gel‑infused construction helps manage minimal to moderate exudate, and the low‑adherent interface supports gentle removal when it’s time to review the injury. Because the hydrogel is water soluble, it can be rinsed away easily with clean water to support follow‑up care and redressing.

Each dressing is sterile and sealed in an easy‑open pouch to aid fast access when seconds matter. Trusted by organisations that prioritise readiness and reliability, AeroBurn Burn Gel Dressing integrates seamlessly into first aid stations and mobile kits across kitchens, workshops, warehouses, classrooms and field vehicles.

• Cools and soothes: water‑based hydrogel helps cool burn surfaces and ease discomfort
• Protective barrier: sterile covering acts as a mechanical barrier during initial care
• Soft non‑woven carrier: conforms comfortably for rapid, even coverage
• Low‑adherent contact: designed for gentle removal to support reassessment
• Water‑soluble gel: rinses off with clean water to simplify follow‑up care

Size – Face Mask 30 × 40 cm: contoured coverage for facial areas, combining a soft non‑woven carrier with cooling hydrogel to drape smoothly and support even contact during initial burn care.

Face‑shaped gel‑infused dressing measuring 30 cm × 40 cm, designed for broad facial coverage. The non‑woven carrier conforms smoothly while the water‑soluble hydrogel provides soothing cooling and supports gentle removal.

This product is not a substitute for direct medical attention from a healthcare practitioner. Always read the label and follow the directions for use.

The post AEROBURN Burn Gel Face Mask 30 x 40cm first appeared on Rural & Remote First Aid.

Fire Blankets are ideal for settings where small Class F fires are a risk such as in kitchens or wherever oils or fats are exposed to potential ignition. They can also be used if a person ‘s clothing has caught fire.

A Fire Blanket cuts off a fire ‘s supply of oxygen, smothering it either permanently or until more effective fire-fighting equipment can be employed.

This product is not a substitute for direct medical attention from a healthcare practitioner. Always read the label and follow the directions for use.

The post Fire Blanket Large 1.2M x 1.8M first appeared on Rural & Remote First Aid.

AeroBurn Burn Gel Dressing is a sterile, gel‑impregnated pad purpose‑built for first aid treatment of minor burns and scalds in workplaces, community settings, vehicles and home kits. Its water‑based hydrogel helps cool the burn surface and soothe discomfort on contact, while the soft non‑woven carrier lays smoothly over curved areas for quick, confident coverage. The single‑use format supports best practice first response and straightforward disposal after reassessment.

Designed as a protective covering, the dressing functions as a mechanical barrier during the critical early phase of care. The gel‑infused construction helps manage minimal to moderate exudate, and the low‑adherent interface supports gentle removal when it’s time to review the injury. Because the hydrogel is water soluble, it can be rinsed away easily with clean water to support follow‑up care and redressing.

Each dressing is sterile and sealed in an easy‑open pouch to aid fast access when seconds matter. Trusted by organisations that prioritise readiness and reliability, AeroBurn Burn Gel Dressing integrates seamlessly into first aid stations and mobile kits across kitchens, workshops, warehouses, classrooms and field vehicles.

• Cools and soothes: water‑based hydrogel helps cool burn surfaces and ease discomfort
• Protective barrier: sterile covering acts as a mechanical barrier during initial care
• Soft non‑woven carrier: conforms comfortably for rapid, even coverage
• Low‑adherent contact: designed for gentle removal to support reassessment
• Water‑soluble gel: rinses off with clean water to simplify follow‑up care

<p><b>Size – 20 × 20 cm:</b> dressing for larger areas, combining a soft non‑woven carrier with cooling hydrogel to drape smoothly and support even contact during initial burn care.</p>

The 20 cm × 20 cm gel‑infused pad delivers broad coverage for larger areas such as forearms or shoulders, combining a soft non‑woven carrier with cooling hydrogel to support comfortable, even contact during initial burn care.

This product is not a substitute for direct medical attention from a healthcare practitioner. Always read the label and follow the directions for use.

The post AEROBURN Burn Gel Dressing 20 x 20cm first appeared on Rural & Remote First Aid.

Fire Blankets are ideal for settings where small Class F fires are a risk such as in kitchens or wherever oils or fats are exposed to potential ignition. They can also be used if a person ‘s clothing has caught fire.

A Fire Blanket cuts off a fire ‘s supply of oxygen, smothering it either permanently or until more effective fire-fighting equipment can be employed.

This product is not a substitute for direct medical attention from a healthcare practitioner. Always read the label and follow the directions for use.

The post Fire Blanket Small 1M x 1M first appeared on Rural & Remote First Aid.

AeroBurn AEROBURN Polyethylene Burn Sheet is a sterile, low‑adherent trauma covering designed for rapid protection of burn injuries in first aid and clinical settings. As part of the Burn Treatments: Dressing category, these polyethylene (PE) sheets create a non‑adherent barrier over the wound to help shield the site from external contamination while minimising trauma during removal. Clear material allows ongoing visual inspection of the affected area, supporting appropriate care decisions during transport and handover.

Low‑Adherent Protection Each sheet is coated on one side with a low‑adherent finish that reduces sticking to delicate, compromised skin. This helps minimise pain and tissue disruption at dressing changes while maintaining a clean interface over the wound surface.

Sterile and Single Use Supplied sterile (ethylene oxide sterilisation) and intended for single use, the sheets support infection prevention protocols in pre‑hospital, workplace, and clinical environments. Tamper‑evident pouch packaging with clear “Peel to Open” instructions promotes fast, aseptic access when seconds matter.

Latex Free and Patient Friendly Construction is latex free to reduce the risk of latex sensitivity. Soft, flexible PE conforms comfortably to body contours on hands, arms, torso, and other curved areas, helping maintain an even protective layer during movement.

Cut‑to‑Size Convenience The sheets can be folded or trimmed to suit different wound geometries and coverage needs. This flexibility helps responders adapt quickly to the injury size while conserving supplies and minimising waste.

Quality Assured Product is sized for efficient first aid kit replenishment and bulk procurement. This reliable range equips responders with a consistent, easy‑to‑use barrier dressing for emergency burn protection from the scene of injury through to clinical assessment. It is suitable for inclusion in workplace kits, emergency vehicles, and community first aid programs where dependable, sterile burn coverage is required.

Supplied as a box of 25 sheets measuring 60 × 90 cm, ideal for bulk restocking of workplace kits and emergency vehicles, reducing changeovers and ensuring reliable coverage for larger areas.

This product is not a substitute for direct medical attention from a healthcare practitioner. Always read the label and follow the directions for use.

The post AEROBURN Polyethylene Burn Sheet 60 x 90cm Box/25 first appeared on Rural & Remote First Aid.

AeroBurn AEROBURN Polyethylene Burn Sheet is a sterile, low‑adherent trauma covering designed for rapid protection of burn injuries in first aid and clinical settings. As part of the Burn Treatments: Dressing category, these polyethylene (PE) sheets create a non‑adherent barrier over the wound to help shield the site from external contamination while minimising trauma during removal. Clear material allows ongoing visual inspection of the affected area, supporting appropriate care decisions during transport and handover.

Low‑Adherent Protection Each sheet is coated on one side with a low‑adherent finish that reduces sticking to delicate, compromised skin. This helps minimise pain and tissue disruption at dressing changes while maintaining a clean interface over the wound surface.

Sterile and Single Use Supplied sterile (ethylene oxide sterilisation) and intended for single use, the sheets support infection prevention protocols in pre‑hospital, workplace, and clinical environments. Tamper‑evident pouch packaging with clear “Peel to Open” instructions promotes fast, aseptic access when seconds matter.

Latex Free and Patient Friendly Construction is latex free to reduce the risk of latex sensitivity. Soft, flexible PE conforms comfortably to body contours on hands, arms, torso, and other curved areas, helping maintain an even protective layer during movement.

Cut‑to‑Size Convenience The sheets can be folded or trimmed to suit different wound geometries and coverage needs. This flexibility helps responders adapt quickly to the injury size while conserving supplies and minimising waste.

Quality Assured Product is sized for efficient first aid kit replenishment and bulk procurement. This reliable range equips responders with a consistent, easy‑to‑use barrier dressing for emergency burn protection from the scene of injury through to clinical assessment. It is suitable for inclusion in workplace kits, emergency vehicles, and community first aid programs where dependable, sterile burn coverage is required.

Supplied as a box of 25 clear, sterile PE sheets each measuring 20 cm x 20 cm, providing adaptable, low‑adherent burn coverage that conforms to contours and supports quick visual checks during care.

This product is not a substitute for direct medical attention from a healthcare practitioner. Always read the label and follow the directions for use.

The post AEROBURN Polyethylene Burn Sheet 20 x 20cm Box/25 first appeared on Rural & Remote First Aid.

AeroBurn AEROBURN Polyethylene Burn Sheet is a sterile, low‑adherent trauma covering designed for rapid protection of burn injuries in first aid and clinical settings. As part of the Burn Treatments: Dressing category, these polyethylene (PE) sheets create a non‑adherent barrier over the wound to help shield the site from external contamination while minimising trauma during removal. Clear material allows ongoing visual inspection of the affected area, supporting appropriate care decisions during transport and handover.

Low‑Adherent Protection Each sheet is coated on one side with a low‑adherent finish that reduces sticking to delicate, compromised skin. This helps minimise pain and tissue disruption at dressing changes while maintaining a clean interface over the wound surface.

Sterile and Single Use Supplied sterile (ethylene oxide sterilisation) and intended for single use, the sheets support infection prevention protocols in pre‑hospital, workplace, and clinical environments. Tamper‑evident pouch packaging with clear “Peel to Open” instructions promotes fast, aseptic access when seconds matter.

Latex Free and Patient Friendly Construction is latex free to reduce the risk of latex sensitivity. Soft, flexible PE conforms comfortably to body contours on hands, arms, torso, and other curved areas, helping maintain an even protective layer during movement.

Cut‑to‑Size Convenience The sheets can be folded or trimmed to suit different wound geometries and coverage needs. This flexibility helps responders adapt quickly to the injury size while conserving supplies and minimising waste.

Quality Assured Product is sized for efficient first aid kit replenishment and bulk procurement. This reliable range equips responders with a consistent, easy‑to‑use barrier dressing for emergency burn protection from the scene of injury through to clinical assessment. It is suitable for inclusion in workplace kits, emergency vehicles, and community first aid programs where dependable, sterile burn coverage is required.

Supplied in the 10 × 10 cm size, this sterile, low‑adherent PE sheet provides focused coverage for small areas while allowing easy folding or trimming to shape. Ideal for first aid kits and incident response where compact, conformable burn protection is required.

This product is not a substitute for direct medical attention from a healthcare practitioner. Always read the label and follow the directions for use.

The post AEROBURN Polyethylene Burn Sheet 10 x 10cm Box/25 first appeared on Rural & Remote First Aid.

AeroBurn low-adherent burn dressings provide fast, protective coverage for thermal injuries in first aid and clinical settings. Each sterile sheet is designed to shield the wound from external contamination while remaining gentle on fragile skin. The contact side features a low-adherent surface to assist with atraumatic removal, supporting timely reassessment and changeover when required. Packaged in an easy, peel-open pouch, the dressing is ready for rapid deployment wherever it is needed—at the incident scene, in workplace first aid rooms, or during transport to definitive care.

The dressing conforms smoothly to body contours for reliable coverage on limbs and torso, helping users secure protection quickly with minimal handling. Materials are latex free to support user comfort and reduce the risk of latex-related sensitivity. 

Developed for use immediately after initial burn first aid (e.g., cooling), the dressing acts as a clean barrier while the patient is stabilised and moved. The sterile presentation and clear labelling—lot, manufacturing and expiry—support inventory control for responders and healthcare providers. Multiple sizes are available across the range to match coverage needs from localised injuries to large-area protection.

• Low-adherent contact layer: designed to minimise trauma and assist with gentle removal
• Sterile, single-use presentation: individually pouched for hygiene and speed
• Barrier protection: helps shield the wound from environmental contaminants
• Conforming design: drapes to body contours for easy placement
• Latex free: suitable for environments where latex sensitivity is a concern
• Peel-open pouch: simple access during emergencies

The Size: 75 × 75 cm sheet offers generous square coverage that suits medium-area burns, allowing the low-adherent dressing to sit smoothly over limbs or torso while maintaining a broad protective barrier.

This option provides a single sterile sheet measuring 75 cm × 75 cm, ideal for medium-area coverage where a broad, square dressing helps create smooth, even protection over the burn site.

This product is not a substitute for direct medical attention from a healthcare practitioner. Always read the label and follow the directions for use.

The post AEROBURN Low-Adherent Burn Dressing 75 x 75cm first appeared on Rural & Remote First Aid.